Shearing Machines


Flying Shearing Crank Type

Aside from Commercial Length Cung Shear, others include Start/ Stop type design – controlled through PLC system and provide very close tolerance of the cut length. Used in Hot Rolling Mills to Crop Front/Tail ends, Cobble Cung in case of misroll, Cooling Bed Length Cung as well as Commercial Length Cung.
img27
img31

Crop & Cobble Shear

The Shear are used in Hot Rolling to Crop Front End, Tail End and as well as to segment cung in case of eventualies. These Shears are start/stop type and are driven either with Flywheel mounted Pneumac Clutch/Brake or Direct DC motor driven. These shears are controlled through PLC System small and provide very close tolerance of the cut length.


Cold Shear

Cold Shearing machines are used to cut the finished product into desired lengths. We manufacture crop shearing machine for all kinds of Bars, rounds and structural products.
img29
img33



Snap Shear

Pneumac Snap Shears are used for cung the material while transfer or miss roll in Intermediate Mill, complete with cylinders and solenoid valves.
The welded steel frames of Snap hear ensure durability and reliability. These corrosion resistant machines are sturdy and have excellent loading capacity.

Rotary Shear

These cost effecve Rotary Shears are used to Crop Font, Tail and as well as to scrap the pre quenched bars during emergency. These Shears are connuous rotang type. Generally these Shears are used to trim Hot Rolled Bars at considerably at lower speed.
img26
img22

Continuous Shear

These cost effecve Rotary Shears are used to Crop Font, Tail and as well as to scrap the pre quenched bars during emergency. These Shears are connuous rotang type. Generally these Shears are used to trim Hot Rolled Bars at considerably at lower speed.

Moving Rotary Shear

Hot cut Front /Back end shearing machine is heavy duty fabricated steel construcon. The frame is made out of thick steel plates, precisely machined to host 450mm P.C.D. helical pinion gear set. The extended input end of one of the pinion shas is connected with Inducon Motor by means of speed reducing pulleys. The output end of the pinion shas hosts a pair of rotary blades as specified above. The rotary movement of the blades is responsible for the cung acon as these are interconnected to a pneumacally operated lever
Moving-Rottery-Shear
img24

Hydraulic Shear

Hydraulic Shear are designed with their high strength capacity to cut metals which are produced in different shapes and secons and it is located right aer the Cooling Bed. Hydraulic Shear are manufactured in 2 different ways. Beside this, cold shears can also be designed and manufactured in different charac terisc of spec ial projec ts, when requested. Our cold shears have been preferred thanks to many years of trouble–free operaonal performance.